Description:
Из WS-серии, куда входят профессиональные интеллектуальные датчики с цифровым интерфейсом, предназначенные для применений в метеорологии.
Встроенная конструкция с вентилируемой защитой от излучения для измерения: -темепературы воздуха -относительной влажности -солнечного излучения -атмосферного давления
Supplementary description:
Relative humidity is measured by means of a capacitive sensor element; a precision NTC measuring element is used to measure air temperature.
The world renowned technology of Kipp+Zonen CMP3 is integrated.
Measurement output can be accessed by the following protocolls: UMB-Binary, UMB-ASCII, SDI-12, MODBUS.
One external temperature or rain sensor is connectable.
Special features:
- Aspirated temperature/humidity measurement
- Open communication protocol:
- UMB-ASCII
- UMB-Binary
- SDI-12
- MODBUS
- Analoge outputs in combination with 8160.UDAC
- Third-Party-Rain gauge sensors are compatible: 0.1mm, 0.2mm, 0.5mm, 1mm heated and unheated
WeightApprox. 1.3kgInterfaceRS485, 2-wire, half-duplexPower supply12-24 VDC ±10%Operating temperature-50...60°COperating rel. humidity0...100% RHHeating20VA at 24 VDCDimensions approx. 150mm, height approx. 268mmProtection level housingIP66RadiationResponse time (95%)Non-stability(change/year)Non-linearity (0 to 1000 W/m)Directional error (at 80° with 1000 W/m)Temperature dependence of sensitivityTilt error (at 1000 W/m)Spectral range (50% points)300...2800nmMeasuring range1400W/mКрепление для мачты, подходящее дляДиаметр мачты 60-76 мм
